The Omnipure K-Series K2305-JJ 6"x2" Sediment 1/4" QC

inline filter features 1/4-inch quick-Connect compression fittings that allow for installation and replacement in a matter of seconds without the use of tools. The Omnipure K-Series Quick-Connect fittings are molded directly into the filter body and cap as a single unit, reducing the chance for weeping or seepage. Cap and body are spin-welded together producing a smooth, consistent seal without the use of glues or binders that can cause contamination. The Omnipure K2305-JJ is a 5 Micron Sediment Filter. One of the primary uses of the K2305-JJ Water Filter is as a system component. Systems can be designed to incorporate the various lengths and diameters--either all the same size or intermixed--to meet specific filtration needs. The Omnipure K2305-JJ Water Filter can be used in icemakers, refrigerators, beverage equipment, drinking fountains, under the counter systems, RO Systems and in conjunction with purification systems. The Omnipure K2305-JJ inline water filter is a 5 micron sediment filter used to reduce dirt, sand, and sediment.

Genuine OEM Product​

Business Hours: Mon-Fri 8:00AM- 6:00PM (M.S.T) 

"we didn't discover water; we discovered the way to leave it natural."

"bottleless water for your health"



Omnipure K2320- JJ Inline GAC 6" x 2" Carbon Block Taste & Odor 1/4" QC

The Omnipure K2320-JJ Inline GAC Postfilter is designed to reduce chlorine, taste and odor and has a flow rate of 0.5 gallons per minute. One of the primary uses of this product is as a system component. The benefit is derived from the fitting being molded directly into the filter cap, greatly reducing clearance. The uniform system is the most efficient use of available space and greater filtering performance in a smaller overall area.

Coconut Shell Granular Activated Carbon filter
1/4" QC
Chlorine, taste & odor reduction
Specifically designed for our filtration units
Capacity: 1000 gallons
Flow Rate: 0.50 GPM (1.9 LPM)
Maximum Pressure: 125 PSIG
Temperature: 35-100° F (2-38° C)